hi i was wondering if the pin that the chain fits on can unscrew ( maybe lock tight in ) i know there is a spring or a spring plate under the cap so that has to be fitted with the rubber seal after the cap has been chromed

hi karol i think this light on E bay is one that may do you the eBay number is 224423062502 and it ends tonight at 23. 52 pm its loot very good the sellers name is Ariel john sorry i have got the time Wong its Tuesday morning at 11.52 AM

i think now you can get club parts without being a AOMCC member

hi did you pour a little bit of oil in the rocker boxes so it can rundown to the sump to pick the oil up and return it back to the tank

as i understand and have been told the club spares supplies Drags with some parts now and again

hi try the Aomcc club spares or look on eBay i have seen 3 lobe and 2 lobe engine sprockets on there

hi Charles i have got the same set up as you a 39 engine with a 53/4 timing cover in my 54 NH with a morgo oil pump and i have a very good oil return :D just do as Roger says and start it up and let it run and see if the oil is returning to the oil tank :?: my old oil pump was not that is wen i fitt...

hi Neal, that is a good bit of advice from Paul , buy from a good supplier they may cost a bit more but you are going to-get one that works properly, there is lots of counterfeit going around

hi Alan that is good to know i did not think about they were matched when i have replaced the cam bushes when i am doing a rebuild i fit the casings together and ream right through them on the mill , i have got a 1939 350 that is fitted with a 1954 nh timing cover on it and it seems to be ok, the en...

hi i would just make a new lug for the cable and for the spring to stop against and just weld it on, you can get welding rods that you can use with a blowtorch , which i have used if you can not do it with a tig welder