Search found 5 matches

Go to advanced search

by Keithwainwright
Wed May 20, 2020 4:57 pm
Forum: Ariel Talk
Topic: FH oil pick up pipe blocked
Replies: 2
Views: 178

FH oil pick up pipe blocked

I had a partial blockage in the oil pick up pipe in the sump . Cleared it no problem bit of gasket was stuck at the side of the steel ball. Should the ball have a spring behind it because mine doesn't but it appears to work.
by Keithwainwright
Mon Jun 24, 2019 8:00 pm
Forum: Four stroke
Topic: Oil laek from dynamo gasket
Replies: 7
Views: 1105

Re: Oil laek from dynamo gasket

Took the timing cover off and there was oil up to the bush . So I put a small hole in the cavity about 20 mm up the side so that a little splashes about . The problem went away
by Keithwainwright
Mon Jun 03, 2019 7:58 pm
Forum: Ariel Talk
Topic: Simes' FH Rebuild
Replies: 200
Views: 26785

Re: Simes' FH Rebuild

Splines and thread had to be repaired on mine .Totally welded it up and recut and recentred prior to a regrind .Works fine
by Keithwainwright
Mon Jun 03, 2019 7:25 pm
Forum: Four stroke
Topic: Oil laek from dynamo gasket
Replies: 7
Views: 1105

Re: Oil laek from dynamo gasket

I don't see how oil is supposed to be in this cavity at all .If I look at the gasket the part of the outer and inner cover creates a cavity for the chain and two sprockets to run and this appears to be separated from the other cavity's. Thanks for the input
by Keithwainwright
Mon Jun 03, 2019 5:25 pm
Forum: Four stroke
Topic: Oil laek from dynamo gasket
Replies: 7
Views: 1105

Oil laek from dynamo gasket

I have had my 650 huntmaster a while now and have just finished rebuilding the engine and it runs spot on ,starts first kick ticks over nice and revs freely with no smoke or burning oil . I left it to stand for about six weeks and drained the oil from the crank before starting as the oil had disappe...

Go to advanced search