Timing pinion left hand nut

User avatar
Leejm
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 1194
Joined: Thu Feb 05, 2015 1:17 pm
Location: Nuneaton, Warwickshire
Contact:

Timing pinion left hand nut

Postby Leejm » Sat Feb 13, 2016 9:05 pm

Has anyone got the above. draganfly is out of stock many thanks lee
1948 NH, BSA D10 SPORTS. 1953 VHA, 1951 KH rigid project.

User avatar
dave.owen
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 1414
Joined: Wed Mar 23, 2011 10:05 pm
Location: swindon
Contact:

Re: Timing pinion left hand nut

Postby dave.owen » Sat Feb 13, 2016 10:53 pm

Have you tried John budgen
Dave
AOMCC Treasurer

User avatar
Leejm
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 1194
Joined: Thu Feb 05, 2015 1:17 pm
Location: Nuneaton, Warwickshire
Contact:

Re: Timing pinion left hand nut

Postby Leejm » Sat Feb 13, 2016 11:00 pm

I will try him in the week.
1948 NH, BSA D10 SPORTS. 1953 VHA, 1951 KH rigid project.

johnwalsh
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 277
Joined: Tue Dec 22, 2015 1:02 pm
Location: Burnham on Crouch Essex
Contact:

Re: Timing pinion left hand nut

Postby johnwalsh » Sun Feb 14, 2016 1:05 am

I bought the same thing from Drags two weeks ago and had to send it back, It was too small. Then said they were unable to supply, where do they get this stuff made!
1958 Huntmaster
1960 Matchless G12
1958 AJS 18s

User avatar
Vincent.vanGinneke
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 3157
Joined: Sat Apr 09, 2011 12:14 am
Location: "The Dutch Branch"
Contact:

Re: Timing pinion left hand nut

Postby Vincent.vanGinneke » Tue Feb 16, 2016 2:35 pm

Surely there must be a obscure bike like BSA/Triumph/Norton/AJS -M-/Brough/James/Excelsior ....that uses the same nut ? Huh?

User avatar
Leejm
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 1194
Joined: Thu Feb 05, 2015 1:17 pm
Location: Nuneaton, Warwickshire
Contact:

Re: Timing pinion left hand nut

Postby Leejm » Tue Feb 16, 2016 6:01 pm

I would of thought so to. I may pop over to supreme motorcycles on Friday there shop is only a few miles away and see if they got anything.
1948 NH, BSA D10 SPORTS. 1953 VHA, 1951 KH rigid project.

howard.aris
Posts: 3
Joined: Sun Jan 01, 2012 9:41 pm
Contact:

Re: Timing pinion left hand nut

Postby howard.aris » Tue Apr 12, 2016 9:01 pm

Did you find a timing pinion nut ? I have a LH 9/16 -20 tap - I think that is the right size - if so, could make for you

User avatar
Leejm
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 1194
Joined: Thu Feb 05, 2015 1:17 pm
Location: Nuneaton, Warwickshire
Contact:

Re: Timing pinion left hand nut

Postby Leejm » Tue Apr 12, 2016 10:31 pm

No still not got one and yes that is the correct thread size. Many thanks Howard lee.
1948 NH, BSA D10 SPORTS. 1953 VHA, 1951 KH rigid project.

User avatar
Richard Kal
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 277
Joined: Thu Jul 14, 2011 6:12 am
Contact:

Re: Timing pinion left hand nut

Postby Richard Kal » Wed Apr 13, 2016 12:01 am

From memory, the crankshaft timing nut on an A10 is 9/16 x 20 tpi LH.

Richard

howard.aris
Posts: 3
Joined: Sun Jan 01, 2012 9:41 pm
Contact:

Re: Timing pinion left hand nut

Postby howard.aris » Wed Apr 13, 2016 9:05 am

Lee, I don't have any fancy steel to make this nut - will A4 stainless be OK ? it is a pretty tough material. Howard


Return to “For sale/wanted - Parts”

Who is online

Users browsing this forum: No registered users and 9 guests