Timing pinion left hand nut

johnwalsh
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 277
Joined: Tue Dec 22, 2015 1:02 pm
Location: Burnham on Crouch Essex
Contact:

Re: Timing pinion left hand nut

Postby johnwalsh » Wed Apr 13, 2016 10:14 am

Howard, I've sent you a PM.
1958 Huntmaster
1960 Matchless G12
1958 AJS 18s

User avatar
Leejm
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 1194
Joined: Thu Feb 05, 2015 1:17 pm
Location: Nuneaton, Warwickshire
Contact:

Re: Timing pinion left hand nut

Postby Leejm » Wed Apr 13, 2016 10:20 am

That will be great thank you Howard that's very helpful of you.
1948 NH, BSA D10 SPORTS. 1953 VHA, 1951 KH rigid project.

User avatar
Leejm
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 1194
Joined: Thu Feb 05, 2015 1:17 pm
Location: Nuneaton, Warwickshire
Contact:

Re: Timing pinion left hand nut

Postby Leejm » Wed Apr 13, 2016 10:20 am

That will be great thank you Howard that's very helpful of you.
1948 NH, BSA D10 SPORTS. 1953 VHA, 1951 KH rigid project.

howard.aris
Posts: 3
Joined: Sun Jan 01, 2012 9:41 pm
Contact:

Re: Timing pinion left hand nut

Postby howard.aris » Thu Apr 14, 2016 11:33 am

Lee, I have made a small batch of the half time pinion nuts - if you would contact me - details on the back of cheval - we can arrange to get one to you.

Steve.k
Posts: 16
Joined: Thu Oct 01, 2015 10:06 pm
Contact:

Re: Timing pinion left hand nut

Postby Steve.k » Sat Apr 16, 2016 9:24 am

Have a look on ebay just purchased a nut for my WNG NOS, enter Ariel 350 and scroll through works out £9.00 with postage.

User avatar
Leejm
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 1194
Joined: Thu Feb 05, 2015 1:17 pm
Location: Nuneaton, Warwickshire
Contact:

Re: Timing pinion left hand nut

Postby Leejm » Sat Apr 16, 2016 11:07 am

I did buy one of them bit it was too big. I think it's for the axle into the flywheel not the pinion nut.
1948 NH, BSA D10 SPORTS. 1953 VHA, 1951 KH rigid project.

Steve.k
Posts: 16
Joined: Thu Oct 01, 2015 10:06 pm
Contact:

Re: Timing pinion left hand nut

Postby Steve.k » Wed Apr 20, 2016 10:45 pm

Thanks Lee I am still waiting for the nut to arrive we will have to wait and see!!!

stuart.wilby
Posts: 57
Joined: Mon Dec 30, 2013 5:21 pm
Location: Wakefield
Contact:

Re: Timing pinion left hand nut

Postby stuart.wilby » Tue Apr 26, 2016 8:57 am

I made one for the camshaft on VMCC members A10 out of another high tensile nut that would have been at least a 10.9, it was made a bit longer than the original nut in order to utilise more of the good threads nearer the end of the shaft, works perfectly with no issues and fitted a lot bett than a bought replacement, so my advice is to purloin a suitable nut which has the same dimensions outside, and machine the bore for the tap size, or get it screw cut if you have no left hand taps. Good luck with it.
1948 4G Square.

User avatar
Leejm
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 1194
Joined: Thu Feb 05, 2015 1:17 pm
Location: Nuneaton, Warwickshire
Contact:

Re: Timing pinion left hand nut

Postby Leejm » Tue Apr 26, 2016 5:04 pm

Howard made one for me. Fits great and this has enabled me to get most the bike back to together now. Still waiting for a couple of things to come to complete it. my bike is now 97 % finished.
1948 NH, BSA D10 SPORTS. 1953 VHA, 1951 KH rigid project.

SteveGus61
Posts: 22
Joined: Sun Oct 04, 2015 11:25 am
Contact:

Re: Timing pinion left hand nut

Postby SteveGus61 » Tue May 03, 2016 9:56 pm

Hi, I think I might have one.

Steve


Return to “For sale/wanted - Parts”

Who is online

Users browsing this forum: No registered users and 5 guests