Ariel Spares for Sale - Last Update September 2017

User avatar
admin
Holder of a Silver Anorak
Holder of a Silver Anorak
Posts: 676
Joined: Thu Feb 10, 2011 1:22 pm
Contact:

Ariel Spares for Sale - Last Update September 2017

Postby admin » Thu Apr 14, 2016 5:10 pm

** this thread/topic is managed by Pete Collings and will be updated by him. Please email Pete directly on petecariel@hotmail.co.uk **
** Prices for parts are included in the word documents attached**


The lists below contain a selection of Ariel spares for sale. They are listed as in New or Very Good condition (NVG), or as in Used condition (U). The date of the list is shown, to indicate when last updated. Further details and prices are shown in the attached DOC files.

Where appropriate, the Ariel part number is supplied, with a brief description of the part. The part number is taken from my Ariel Motors parts lists, and is believed to be correct for the part specified. However, if you are uncertain or want more information, please contact me for additional details (and photo if appropriate). Please ensure the parts are suitable for your purposes before purchase, as exchange is not possible. The parts are listed alphabetically by description.

Email contact via petecariel@hotmail.co.uk Do not use the AOMCC forum private messaging service, due to the limited space available for messages (NB. I will always try to reply promptly to enquiries, but some service providers may block emails from hotmail addresses. If no reply, email again and I will use another provider to reply.)

Please be aware that I do not have additional parts beyond those listed, and although I will update the list as all the spares are catalogued or sold, I cannot provide a service to source those scarce spares you have been looking for over the last decade!
All items are priced, but do not include packaging and delivery charges. These will be provided for the part(s) ordered, please specify if faster delivery is required. Parts are despatched using the UK Post Office service, with a certificate of posting obtained on despatch. Delivery is at the risk of the purchaser. I am selling parts as a private individual, and thus all parts are priced and sold without any guarantee. The buyer accepts these conditions when ordering parts.

Payment must be in Pounds Sterling. Please note that I do not accept Pay Pal or supply bank details, payment is by cash notes, money order or cheque drawn on a UK based bank. If paying by cheque, a few days are allowed for the banks to process the payment.
I will post items to Europe (EU members), but not other overseas destinations, and will limit the total weight of items sent to the maximum of airmail or surface mail sent by the UK postal service (currently 2Kg). Any import charges will be the responsibility of the purchaser.

The date that each list was last updated is shown, so check that any download is current.

LUCAS MO1/K2F MAGNETOS

I have some overhauled (but not fully reconditioned) MO1 and K2F magnetos, some sparking and some with no spark, some complete and some partially complete, some suitable for Ariels and some for other makes, availability and price varies, so email for further details. If sparking, they have not been road tested, so do not fit and set off on a long trip before a test run! Due to the weight, I will only post to a UK address, unless the buyer makes arrangements for collection.

ARIEL SINGLE SPARES
LAST UPDATE 02.10.17

Camshaft bush inner
Camshaft bush outer
Camshaft twin lobe (F type) c/w OHV followers
Camshaft twin lobe (664 type) c/w SV followers
Camshaft twin lobe (664 type) c/w SV followers
Camshaft twin lobe (F type) c/w pinion
Engine bolt spacers (various, each)
Engine sprocket 19T
Engine sprocket 20T
Engine sprocket sliding member
Engine sprocket spring plate
Oil pump early type
NH flywheels and conrod (no crankpin)
NH pushrod tubes pair
NH solid copper head gasket
Plunger/Rigid engine plate set (4 plates)
Plunger/Rigid front engine plate pair
Pushrod tunnel rubber oil seal pair
Rocker box inlet
Swinging arm front engine plate pair
VH/HT low comp pistons
VH piston ring set +020
VH +020 oil ring
VH STD Reclaim ring set (BSA M20)
VH Reclaim top ring oversize (BSA M20)
WNG piston STD bore
WNG piston +020


ARIEL HUNTMASTER SPARES
LAST UPDATE 18.09.17

Breather pipe
Cam follower locating pin
Cam follower set
Camshaft
Conrod bolt castellated nuts (2)
Conrod bolt locknuts (4)
Crankcase breather
Crankcase oil return pipe
Crankshaft pinion
Cylinder head gasket
Dynamo strap one piece
Manual magneto pinion
Oil pressure relief valve complete
Oil pump
Piston (low compression, STD bore)
Piston ring set std
Piston rings loose
Rocker arms inlet
Rockerbox cap nut
Rockerbox oil feed union screw pair
Shock absorber spring nut
Timing gear cam drive
Timing side main bearing bush
Valves inlet (price is for each)
Valve guide set (4 off iron guides)
Valve guide
Valve spring bottom collar


ARIEL CLUTCH & GEARBOX SPARES - All gearbox parts are for a GB gearbox (1952-59) unless otherwise stated
LAST UPDATE 02.10.17

Cable adjuster
Cam plunger
Clutch adjusting sleeve cap with screws
Clutch operating lever
Clutch spring plate
Clutch pushrod ball bearing
Clutch spring set (strong)
Drain plug
Foot change lever rubber
GB short mainshaft (AJS type)
GB gears (each)
GB Sleeve gear
GB Sleeve gear bushes (pair)
Gearbox adjuster eyebolt nut
Gear cluster (8 gears)
Gearbox sprocket 19T
Gearchange spindle
Inner cover c/w speedo drive
Kickstart case cover locating piece
Layshaft
Mainshaft nut kickstart end
Oil seal holder
Quadrant
Selector drum/Cam assembly
Selector fork pair
Selector fork peg pair
Sprocket nut



OTHER ARIEL SPARES - [FWH - Full Width Hub (1956-59), HWH - Half Width Hub (Pre 1956)]
LAST UPDATE 10.09.17

Arrow/Leader crankcase/barrel stud
Colt gasket set (incomplete)
Fork top bush pair
FWH abutment for brake cable (BSA type)
FWH brake cam
FWH brake arm
FWH brake wedge and peg (pair)
FWH brake shoe adjuster
FWH brake arm and spindle/cam
FWH brake shoes (pair)
FWH front brake torque arm
FWH rear brake crank arm
HWH fork slider (non brake side)
KH piston pair STD
KH piston
KH rocker cover cap (late type)
Leader brake shoe lining set
NH late top yoke and handlebar clamp
Pivoting Kickstart arm top piece
Plunger shrouds (inner and outer) pair
Primary chaincase oil bleed screw
Rear brake cable adjuster mount
Rear chainguard front piece (FERC type)
SQ4 clutch dome
SQ4 footrest hanger
Steering column plug
Swinging arm spindle nuts (pair)
Telefork spring pair 9 1/2 inch length
Telefork spring pair 11 3/8 inch length
Toolbox lid screw (possibly WNG)
Top yoke (alloy)
VA gasket set incomplete
Wheel spokes and nipples (each)
Waterslide transfers (each)

ARIEL HT SPARES
LAST UPDATE 10.09.17

Engine sprocket 17T
Engine sprocket 16T
Front engine plate pair
HT piston +020
HT piston +030
HT piston STD
HT piston +030
HT piston +030
Layshaft
First gear layshaft 30T
Second gear mainshaft 20T
Second gear mainshaft 21T
Sleeve gear 30T
Sleeve/driving gear pair (30/16T)
Sleeve/driving gear pair (30/17T)
Sleeve/driving gear pair (30/17T)
Attachments
ARIEL OTHER SPARES.doc
(46 KiB) Downloaded 10 times
ARIEL GEARBOXCLUTCH SPARES.doc
(37 KiB) Downloaded 3 times
ARIEL SINGLE SPARES.doc
(37.5 KiB) Downloaded 19 times
ARIEL HUNTMASTER SPARES.doc
(40.5 KiB) Downloaded 17 times
ARIEL HT SPARES.doc
(30.5 KiB) Downloaded 13 times

kevin michael
Posts: 16
Joined: Mon Dec 07, 2015 1:21 pm
Location: suffolk
Contact:

Re: Ariel Spares for Sale

Postby kevin michael » Sun Jun 12, 2016 7:45 am

hello ,would like the brake plate and brake wedge and pegs,these are listed on the,other ariel spares, part of the list, I have a 53 sq4, im not sure what the abbreviation fwh is and whether these are suitable, would you perhaps know if these would fit, cheers kevin m

pete.collings
Holder of a Waxed Cotton Anorak
Holder of a Waxed Cotton Anorak
Posts: 467
Joined: Fri Feb 18, 2011 10:26 am
Location: Cardiff
Contact:

Re: Ariel Spares for Sale

Postby pete.collings » Sun Jun 12, 2016 11:28 am

Hi Kevin I have emailed you separately, but for anyone else unsure FWH means full width hub, as fitted 1956-59, and HWH means half width hub, fitted prior to 1956.

pete.collings
Holder of a Waxed Cotton Anorak
Holder of a Waxed Cotton Anorak
Posts: 467
Joined: Fri Feb 18, 2011 10:26 am
Location: Cardiff
Contact:

Re: Ariel Spares for Sale

Postby pete.collings » Tue Jul 26, 2016 7:33 pm

I plan to be at the Annual rally on Friday and Saturday, so if you are going have a look at the lists (which are updated as parts arrive/are sold) to see if there is anything you need.

pete.collings
Holder of a Waxed Cotton Anorak
Holder of a Waxed Cotton Anorak
Posts: 467
Joined: Fri Feb 18, 2011 10:26 am
Location: Cardiff
Contact:

Re: Ariel Spares for Sale - Last Update September 2017

Postby pete.collings » Sun Sep 10, 2017 9:14 pm

During the summer I purchased an alloy Ariel single and a lot of spares from the estate of a club member who passed away last year. I have in the subsequent months been sorting through the spares to decide what to keep as reserve spares for the purchased bike, what needs to be assembled/repaired/completed, and what is surplus to my needs. I have taken the spares to various autojumbles over the summer (including the annual rally at Lowestoft), but have now attempted to update my lists as above to reflect what is available. The late club member was into trials, so there are some HT parts in a new list, but as I don't have a lot of experience of HTs, please feel free to ask any questions about the listed parts. I now also have some more MO1 and K2F magnetos, some complete and some only partially complete, althougth not all the MO1s are to Ariel specification.

Do have a new look at the updated lists, there may be a few more parts to add as I continue to go through the parts to identify them and assess their condition. In general, they will be mostly for postwar swingarm bikes, although there are a few Plunger/Rigid bits.

Please feel free to email me with any questions about parts and availability, and I will try to help wherever possible.

Simonjones
Posts: 2
Joined: Wed Nov 09, 2016 8:05 pm
Contact:

Re: Ariel Spares for Sale - Last Update September 2017

Postby Simonjones » Sat Sep 30, 2017 11:04 pm

Hi Pete. Can I have the GB gearbox spindle 3718-52 please if still available.
Cheers Simon

pete.collings
Holder of a Waxed Cotton Anorak
Holder of a Waxed Cotton Anorak
Posts: 467
Joined: Fri Feb 18, 2011 10:26 am
Location: Cardiff
Contact:

Re: Ariel Spares for Sale - Last Update September 2017

Postby pete.collings » Sun Oct 01, 2017 3:17 pm

Hi Simon. I can help, please contact me via the email at the top of this listing for further details.
Regards Pete

keith wainwright
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 111
Joined: Tue May 08, 2012 2:26 pm
Location: Surrey
Contact:

Re: Ariel Spares for Sale - Last Update September 2017

Postby keith wainwright » Sun Oct 01, 2017 8:52 pm

Have you still got the fwh for sale if so would like it. Keith

pete.collings
Holder of a Waxed Cotton Anorak
Holder of a Waxed Cotton Anorak
Posts: 467
Joined: Fri Feb 18, 2011 10:26 am
Location: Cardiff
Contact:

Re: Ariel Spares for Sale - Last Update September 2017

Postby pete.collings » Sun Oct 01, 2017 11:44 pm

Hi Keith. Some misunderstanding, I had only put the FWH and HWH as an explanation of the abbreviations, as someone had previously asked what they meant. I don't have any complete hubs, onlt the parts listed.
I have moved the explanation to the section header to hopefully make the meaning clearer.


Return to “For sale/wanted - Parts”

Who is online

Users browsing this forum: No registered users and 1 guest