SQ 4 drive side exhaust P clamp - 6076-37

User avatar
john.davies
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 118
Joined: Mon Nov 30, 2015 9:33 am
Location: Bath, UK
Contact:

SQ 4 drive side exhaust P clamp - 6076-37

Postby john.davies » Wed Aug 01, 2018 6:05 pm

I am short of the P clamp for the drive side exhaust pipe on my 46 SQ4, part number 6076-37, and Drags have not have any for ages or expect any soon so I was wondering if anybody has a spare one or the dimensions so I could make my own. I only really need the length from the frame mount to the pipe so that it is held the correct distance out. Thanks, John
Attachments
6076-37.jpg
6076-37.jpg (46.3 KiB) Viewed 169 times
Image 1937 Panther M100 Rigid, 1946 Ariel Square 4 Rigid / Girder (WIP), 1952 Norton Model 7, 1958 BSA C15, 1961 Triumph T120R, 1962 BSA A10 SR Export

User avatar
paul.jameson
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 1381
Joined: Wed Oct 12, 2011 3:04 pm
Location: Herefordshire
Contact:

Re: SQ 4 drive side exhaust P clamp - 6076-37

Postby paul.jameson » Wed Aug 01, 2018 8:02 pm

Bolt centre to side of pipe is about an inch and a half on mine. The timing side is longer, about 2 inches.
Paul Jameson
36 4G, 37 VH, 53 ex ISDT KHA (project), 54 KH(A), 54 4G Mk IV (project), Healey 1000/4 (project)
Former Machine Registrar & Archivist, General Secretary and Single Spares Organiser.

User avatar
john.davies
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 118
Joined: Mon Nov 30, 2015 9:33 am
Location: Bath, UK
Contact:

Re: SQ 4 drive side exhaust P clamp - 6076-37

Postby john.davies » Thu Aug 02, 2018 8:47 am

Hi Paul, that's interesting as the pictures on Drags web site seem to show the drive side one to be longer than the timing side. Here is their picture of 6075-37 (timing side).
Attachments
6075-37.jpg
6075-37.jpg (47.12 KiB) Viewed 118 times
Image 1937 Panther M100 Rigid, 1946 Ariel Square 4 Rigid / Girder (WIP), 1952 Norton Model 7, 1958 BSA C15, 1961 Triumph T120R, 1962 BSA A10 SR Export

User avatar
chris.shearwood
Holder of a Waxed Cotton Anorak
Holder of a Waxed Cotton Anorak
Posts: 364
Joined: Mon Feb 28, 2011 5:28 pm
Location: Sutton, Quebec, Canada
Contact:

Re: SQ 4 drive side exhaust P clamp - 6076-37

Postby chris.shearwood » Thu Aug 02, 2018 12:30 pm

The timing side clamp on my Sq4 matches Paul's but my drive side one is about 2.5" from the centre of the hole to the edge of the pipe. Even with the 2.5" bracket the pipe/silencer doesn't clear the brake pedal bracket by much.
1946 4G, 1950 NG and 1951 VH

User avatar
john.davies
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 118
Joined: Mon Nov 30, 2015 9:33 am
Location: Bath, UK
Contact:

Re: SQ 4 drive side exhaust P clamp - 6076-37

Postby john.davies » Thu Aug 02, 2018 12:54 pm

Hi Chris, that is about what I though it would be (2.5") when test fitting the drive side pipe and silencer and that would only just clear the brake pedal spindle as you say. Thank you.
Image 1937 Panther M100 Rigid, 1946 Ariel Square 4 Rigid / Girder (WIP), 1952 Norton Model 7, 1958 BSA C15, 1961 Triumph T120R, 1962 BSA A10 SR Export


Return to “For sale/wanted - Parts”

Who is online

Users browsing this forum: No registered users and 3 guests