MIKUNI 28 on an Arrow SS

terrylangley
Posts: 59
Joined: Sat Sep 30, 2017 8:15 pm
Contact:

MIKUNI 28 on an Arrow SS

Postby terrylangley » Wed Jul 08, 2020 1:59 pm

I fancy trying a Mikuni 28mm carburetor (which I already have) on my Arrow SS. Does anyone already have one fitted to their Arrow? If so was it worth doing and what jets, needles, settings etc. did you use? Any advice would be much appreciated.
Thanks Terry Langley.

bh.sprint
Holder of a Waxed Cotton Anorak
Holder of a Waxed Cotton Anorak
Posts: 363
Joined: Wed Oct 31, 2012 7:21 pm
Location: South Yorkshire
Contact:

Re: MIKUNI 28 on an Arrow SS

Postby bh.sprint » Fri Jul 10, 2020 7:56 pm

Hello Terry,

I have a 26 mm Mikuni carb on my Arrow but the engine is mildly tuned thanks to Ron at Fahron. The Mikuni works well and ticks over smoothly, starts hot or cold but it is a bit more complicated to set up especially when the engine is non standard. I had to use bigger pilot jets and bigger needle jets to get it to work well and that took time to get to know the carb and the effect on the engine performance.
I prefer them but my Leader with a 376 Amal also runs well !

Brian H.


Return to “Two stroke”

Who is online

Users browsing this forum: No registered users and 3 guests