Page 1 of 1

two stroke head bolt torque

Posted: Fri Apr 12, 2019 1:12 pm
by BernieP
I have been trying to access this web page in the clubs library, but the link does not work.
does any body know the correct link?
I have been on the Knowledgebase and did a thorough search and could not find it.

"There is a factory document in the club library which gives two stroke head bolt torque".
http://www.arielownersmcc.co.uk/members ... spx?id=245

Very many thanks
Bernie

Re: two stroke head bolt torque

Posted: Fri Apr 12, 2019 2:22 pm
by BernieP
Thanks to all that looked, I have finally found it when I did an advanced search for item 245
Bernie

Re: two stroke head bolt torque

Posted: Fri Apr 12, 2019 8:18 pm
by will_curry
Bernie,

That link is an old link set up before the migration to the new server.

For what it's worth I wouldn't expect any link containing the phrase '.aspx' to work now.

Will

Re: two stroke head bolt torque

Posted: Sat Apr 13, 2019 5:51 pm
by BernieP
Thanks for the info Will. I will try and remember that.
Bernie

Re: two stroke head bolt torque

Posted: Mon Apr 15, 2019 10:22 am
by terrylangley
Is there actually a recommended torque for the head bolts? There is a tightening sequence in the workshop manual but no torque...or is there???

Re: two stroke head bolt torque

Posted: Mon Apr 15, 2019 4:14 pm
by keith.mettam
Here is a copy of the factory recommended settings.
Ariel Torque Settings.doc
(805 KiB) Downloaded 190 times

Regards, Keith.