Anything about Ariels
User avatar
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 3924
Joined: Mon Oct 17, 2011 11:16 pm
Location: Norfolk


Postby simon.holyfield » Sun May 05, 2013 9:00 pm


Has anyone used the exhaust pipes and silencers from Feked? I normally buy Armours products, anyone had good or bad experiences of either?


'51 Square Four,
'58 Huntmaster,
'42 W/NG,
'30 Model A

User avatar
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 1131
Joined: Mon Feb 14, 2011 4:46 pm
Location: Herefordshire. Mud capital of the world

Re: Exhausts

Postby john.nash » Sun May 05, 2013 9:33 pm

I got an unpolished stainless system, for my WNG, from Armours
With some work with the wet/dry it looked just right - until it got hot and went straw/brown.

I got it quick and it fitted.

I do wonder if all the exhausts come from the same place...
John "Josh" Nash
AOMCC No.4119
2009 royal Enfield,1978 t140 bonneville, '67 CJ750, 196-ish Ural M62 outfit, 1960 k750, ''51 kH500, ''49 soon to be Ariel bobber, 47 VH twinport, '44 Ariel WNG, '43 Ariel WNG, '41 Ariel WNG and piles of rusty scrap ....

Holder of a Waxed Cotton Anorak
Holder of a Waxed Cotton Anorak
Posts: 315
Joined: Fri Dec 30, 2011 6:29 pm

Re: Exhausts

Postby GuyH » Tue May 07, 2013 7:27 am

I bought a pair of exhausts with the balance pipe for a Laverda SF750 from feked and they fitted OK after a bit of fettling. They look good and work well and I suspect are the same as the ones sold by a well known Laverda dealer where a friend got some from - they were exactly the same as mine but more expensive and needed the same work to get them to fit properly. Having said that I've never had any problems with Armours pipes either.
1939 600 OHV 4F, 1956 MKII Square Four, a Healey, 1939 OH 250, 1939 OG 250 plus a couple of OG250 projects, 1920 Ariel V twin project and a variety of lesser makes

Return to “Ariel Talk”

Who is online

Users browsing this forum: No registered users and 12 guests