Seat mounting Square 4 Mk 1

Singles, twins and fours.
Brian.Challinor
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 117
Joined: Thu Dec 01, 2011 10:28 pm
Location: Crewe
Contact:

Seat mounting Square 4 Mk 1

Postby Brian.Challinor » Fri Dec 28, 2012 6:18 pm

Is there a bracket that bolts to the nose of the single seat , that in turn connects to the frame?

MARK.WALSH
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 276
Joined: Tue Dec 27, 2011 10:46 pm
Location: Kent England
Contact:

Postby MARK.WALSH » Fri Dec 28, 2012 6:31 pm

Brian
there are two slotted lengths of metal about 5/8th wide and about 5 inches long and 3/16th thick. The slots are to make height adjustments I assume.
I can get precise dimensions when I next get to my garage - they should be easy to make if you can not find any
Mark

Brian.Challinor
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 117
Joined: Thu Dec 01, 2011 10:28 pm
Location: Crewe
Contact:

Re: Seat mounting Square 4 Mk 1

Postby Brian.Challinor » Fri Dec 28, 2012 8:56 pm

Mark
Thanks that will help alot.

MARK.WALSH
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 276
Joined: Tue Dec 27, 2011 10:46 pm
Location: Kent England
Contact:

Postby MARK.WALSH » Tue Jan 01, 2013 4:09 pm

Brian
the brackets are 14cm by 2.4 cm and 4mm thick There is a mounting hole 8mm diameter and a slot for adjustment also 8mm.
i have a photo that i can send you
regards
mark

Brian.Challinor
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 117
Joined: Thu Dec 01, 2011 10:28 pm
Location: Crewe
Contact:

Re: Seat mounting Square 4 Mk 1

Postby Brian.Challinor » Wed Jan 02, 2013 11:09 pm

Mark.
A photo would help ,thanks Brian

MARK.WALSH
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 276
Joined: Tue Dec 27, 2011 10:46 pm
Location: Kent England
Contact:

Re: Seat mounting Square 4 Mk 1

Postby MARK.WALSH » Wed Jun 12, 2013 10:39 pm

brian
as i am slowly rebuilding my 1951 square 4 I now doubt the bracket I showed you is correct.
Have you established the correct one, or do you now know what it looks like. Sorry if I misled you but the one I had was on the bike when I bought it
Thanks
Mark


Return to “Four stroke”

Who is online

Users browsing this forum: No registered users and 15 guests