Ariel 1929 fork parts

Singles, twins and fours.
User avatar
ismohautala
Posts: 55
Joined: Tue May 15, 2012 2:36 pm
Location: Finland
Contact:

Ariel 1929 fork parts

Postby ismohautala » Wed Mar 05, 2014 8:53 pm

Hi

Can someone confirm if these parts belong to Ariel 1929 model fork?
The hole distances centre to centre 92mm and bolt is 1/2in.
Attachments
IMGP1899 (600 x 450).jpg
IMGP1899 (600 x 450).jpg (22.59 KiB) Viewed 1467 times
Nuts for rusty nuts

User avatar
ismohautala
Posts: 55
Joined: Tue May 15, 2012 2:36 pm
Location: Finland
Contact:

Postby ismohautala » Fri Mar 07, 2014 7:10 am

Morning

So nobody knows?
Nuts for rusty nuts

User avatar
barry.swanson
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 274
Joined: Sat Mar 05, 2011 10:45 pm
Location: New Zealand, BOP.
Contact:

Postby barry.swanson » Fri Mar 07, 2014 7:52 am

...hi Ismo, I've not been visitingt the forum much lately, but better late than never...are you sure you measured right and the link is not 82mm centres?,
coz thats wot mine are...the steering dampner thingy looks correct to me...

User avatar
adrie.degraaff
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 2979
Joined: Sun Feb 27, 2011 10:07 am
Location: Holland
Contact:

Re: Ariel 1929 fork parts

Postby adrie.degraaff » Fri Mar 07, 2014 9:39 am

Yes if 82.5 mm than both could be 1929.

User avatar
barry.swanson
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 274
Joined: Sat Mar 05, 2011 10:45 pm
Location: New Zealand, BOP.
Contact:

Postby barry.swanson » Fri Mar 07, 2014 9:51 am

...I believe so...

User avatar
ismohautala
Posts: 55
Joined: Tue May 15, 2012 2:36 pm
Location: Finland
Contact:

Re: Ariel 1929 fork parts

Postby ismohautala » Sat Mar 08, 2014 7:45 am

Morning

Thanks , you are right and links are wrong.The search goes on , links and spring anchorage (lower) are missing.

All tips are welcome .
Nuts for rusty nuts


Return to “Four stroke”

Who is online

Users browsing this forum: simon.holyfield and 11 guests