VG 32 Valve dimensions ?

Singles, twins and fours.
johann.patek
Posts: 38
Joined: Fri Feb 17, 2012 8:55 am
Location: vienna
Contact:

VG 32 Valve dimensions ?

Postby johann.patek » Sun Feb 24, 2019 8:43 am

Anybody out there who can supply dimensions of the valves for a 32 VG four valve head ? They appear different to the slopers though. Thanks in advance
Ariel 1930 model G special, Ariel SQ4 1957, Norton Commando 750, Norton Mercury, Norton 99, Norton N15CS, Velocette Venom, Velocette Thruxton, Velocette LE x2, Morgan F Super, Calthorpe Ivory 500, Yamaha sr500, Moto Guzzi Falcone

klaus gerhard
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 171
Joined: Tue Nov 01, 2011 8:18 am
Location: Erlangen, Germany
Contact:

Re: VG 32 Valve dimensions ?

Postby klaus gerhard » Mon Feb 25, 2019 6:34 pm

Hansi,
I think the VG and SG valves are identical. Which dimensions do you need?
Regards Klaus

stephen.fawcett
Posts: 4
Joined: Tue Dec 27, 2011 11:10 pm
Contact:

Re: VG 32 Valve dimensions ?

Postby stephen.fawcett » Thu Feb 28, 2019 10:12 pm

Hi,
Did you get the dimensions you need?
I have a couple of VH 32’s in bits these will be the same valves I’m sure.
Regards
Stephen

hristo.kiskinov
Posts: 27
Joined: Thu Apr 14, 2011 5:24 pm
Contact:

Re: VG 32 Valve dimensions ?

Postby hristo.kiskinov » Mon Mar 04, 2019 9:58 am

For VH32, VG32 and SG32 (all 4-Valve) the part numbers are:
415-32 (A7/210a) inlet
445-32 (A7/173a) exhaust
and the measures for both types are:
- valve stem 9/32" = 7.14mm
- head 1 21/64" = 33.73mm
- length 3 13/64" = 81.36mm
- collet groove 1/4" diameter = 6.35mm


For SG31 (4-Valve) the part numbers are:
415-31 (A7/210) inlet
445-31 (A7/173) exhaust
and I do not know the difference.

regards
Christo


Return to “Four stroke”

Who is online

Users browsing this forum: No registered users and 15 guests