Oils for 1942 W/NG

specifications, colours, contract nos, variations etc
FOR GENERAL ENGINE AND GEARBOX, USE THE FOUR STROKE TECHNICAL FORUM
User avatar
simon.holyfield
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 2665
Joined: Mon Oct 17, 2011 11:16 pm
Location: Norfolk
Contact:

Re: Oils for 1942 W/NG

Postby simon.holyfield » Tue Apr 24, 2018 10:33 pm

Sounds like you have covered a few miles Richard!
cheers

Simes

'51 Square Four, Masquerading D3 Bantam, '58 Huntmaster, '42 W/NG, http://ariel-square-four.blogspot.com

User avatar
LuisPaz
Posts: 59
Joined: Fri Jan 19, 2018 12:59 am
Contact:

Re: Oils for 1942 W/NG

Postby LuisPaz » Tue May 01, 2018 4:55 pm

nevhunter wrote:According to the W/NG factory Book, 2and 1/2 inches below filler orifice. Mix external and add grease to the oil constantly mixing till it thickens but still just runs at normal temperature. I don't know the proportions as it varies with the ingredients you use. Use a gear oil and a high temp grease . Some greases are thicker than others. Don't trust it to mix in the box as it may block oilways, particularly to the layshaft bushes. Nev


Thank you very much Nev! Regards!
Luis, from Argentina

nevhunter
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 2951
Joined: Tue May 10, 2011 9:42 am
Location: Victoria.. Australia.
Contact:

Re: Oils for 1942 W/NG

Postby nevhunter » Wed May 02, 2018 11:28 pm

You are welcome Luis. I saw a reference to quantity somewhere but can't find it again. It's likely that it won't drain fully so best to stick with the level from the top of the filler hole. Nev


Return to “W/NG Technical”

Who is online

Users browsing this forum: No registered users and 2 guests