Field stands

specifications, colours, contract nos, variations etc
FOR GENERAL ENGINE AND GEARBOX, USE THE FOUR STROKE TECHNICAL FORUM
User avatar
alan.moore
Holder of a Silver Anorak
Holder of a Silver Anorak
Posts: 753
Joined: Sat Jul 19, 2014 1:29 pm
Location: Leicestershire UK
Contact:

Re: Field stands

Postby alan.moore » Thu Sep 13, 2018 10:11 pm

doug.pearce wrote:Hi, I inhereted a repro when I purchased my WNG the boss provided was totally inappropriate I took photos of field that was still original then designed my own boss which made by a friend.
With some minor adjust with washer to get the stop in the right place then used a good quality metal glue to hold in place happy to provide drg if I can find it.


Doug, drawing would be good if you find it
1939 VH Redhunter;1942 RN WNG;1951 Triumph 6T Thunderbird;1970 BSA B175 Bantam;1986 Yamaha SRX600 single
http://cloggymoore.wix.com/triumph-pre-unit-6t

User avatar
LuisPaz
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 147
Joined: Fri Jan 19, 2018 12:59 am
Contact:

Re: Field stands

Postby LuisPaz » Fri Sep 21, 2018 6:34 pm

LuisPaz wrote:I take Alan post to some questions.

Need lenght and others measurements to make a repro field stand.

Show this drawing to take easy these measurements

A and B Lenght tube.
D and E Diameter
C Lenght between centers
F square piece thickness

Thanks in advance!


Richard Hobart Hi Mariano - The measurements from my W/NG stand are as follows :- A - 40mm; B - 465mm; C - 25mm; D - 68mm; E - 20mm; F - 13mm. Of course, I have no way of knowing whether or not my one is the original item, but I've no reason to believe it would not be. I hope that's of use. Best regards - Richard.
Luis, from Argentina
1944 Ariel WNG


Return to “W/NG Technical”

Who is online

Users browsing this forum: No registered users and 1 guest