Ariel Rear Stand Id

specifications, colours, contract nos, variations etc
FOR GENERAL ENGINE AND GEARBOX, USE THE FOUR STROKE TECHNICAL FORUM
User avatar
LuisPaz
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 194
Joined: Fri Jan 19, 2018 12:59 am
Contact:

Ariel Rear Stand Id

Postby LuisPaz » Thu Dec 06, 2018 10:51 am

Can you identify this stand? Ariel made?
Thanks in advance!
Attachments
unknowstand.jpg
Luis, from Argentina
1944 Ariel WNG

User avatar
alan.moore
Holder of a Silver Anorak
Holder of a Silver Anorak
Posts: 871
Joined: Sat Jul 19, 2014 1:29 pm
Location: Leicestershire UK
Contact:

Re: Ariel Rear Stand Id

Postby alan.moore » Thu Dec 06, 2018 3:50 pm

Luis
These are the casting numbers on the stand fitted to my 1939 VH and 1942 WNG:

viewtopic.php?f=21&t=7905&p=53818&hilit=stand#p53818

So E9/599 matches mine so looks like its Ariel rigid frame
1939 VH Redhunter;1942 RN WNG;1951 Triumph 6T Thunderbird;1970 BSA B175 Bantam;1986 Yamaha SRX600 single
http://cloggymoore.wix.com/triumph-pre-unit-6t

User avatar
LuisPaz
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 194
Joined: Fri Jan 19, 2018 12:59 am
Contact:

Re: Ariel Rear Stand Id

Postby LuisPaz » Thu Dec 06, 2018 4:51 pm

Alan, thank you!!
You has given me a great News!
I have a very rough reproduction installed and with this I can complete my WNG with original parts.
I have been lucky to find that part in my country, where there are few Ariels.
Cheers
Luis, from Argentina
1944 Ariel WNG

User avatar
paul.jameson
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 1506
Joined: Wed Oct 12, 2011 3:04 pm
Location: Herefordshire
Contact:

Re: Ariel Rear Stand Id

Postby paul.jameson » Thu Dec 06, 2018 8:52 pm

Most definitely Ariel rigid frame, 1936 onwards - you have the correct part for your bike.
Paul Jameson
36 4G, 37 VH, 53 ex ISDT KHA (project), 54 KH(A), Healey 1000/4 (project)
Former Machine Registrar & Archivist, General Secretary and Single Spares Organiser.

User avatar
LuisPaz
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 194
Joined: Fri Jan 19, 2018 12:59 am
Contact:

Re: Ariel Rear Stand Id

Postby LuisPaz » Fri Dec 07, 2018 3:39 pm

Thank you Paul!
Luis, from Argentina
1944 Ariel WNG

nevhunter
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 3316
Joined: Tue May 10, 2011 9:42 am
Location: Victoria.. Australia.
Contact:

Re: Ariel Rear Stand Id

Postby nevhunter » Fri Dec 07, 2018 10:18 pm

A lot of bikes of that period were two pipe and upswept so the legs are straight. The RH with a low pipe has to have a more defined curve on the RH (with spring) side, starting close to the top to clear the muffler.. It should bend OK . The1941 W/NG parts book shows it as 5500-36 Nev

User avatar
LuisPaz
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 194
Joined: Fri Jan 19, 2018 12:59 am
Contact:

Re: Ariel Rear Stand Id

Postby LuisPaz » Fri Dec 07, 2018 11:50 pm

Thank you Nev! My 1944 spare parts list
Attachments
20181207_204118.jpg
20181207_204219.jpg
Luis, from Argentina
1944 Ariel WNG

User avatar
alan.moore
Holder of a Silver Anorak
Holder of a Silver Anorak
Posts: 871
Joined: Sat Jul 19, 2014 1:29 pm
Location: Leicestershire UK
Contact:

Re: Ariel Rear Stand Id

Postby alan.moore » Sat Dec 08, 2018 1:01 pm

The 1939 singles part is also 5500-36. The parts list only lists one stand so it must be suitable for upswept and down swept exhausts. It does however list two pivot bolts for the left side depending on which system you have ...but for one pipe (right side) everything is the same

Cheers
Alan
1939 VH Redhunter;1942 RN WNG;1951 Triumph 6T Thunderbird;1970 BSA B175 Bantam;1986 Yamaha SRX600 single
http://cloggymoore.wix.com/triumph-pre-unit-6t


Return to “W/NG Technical”

Who is online

Users browsing this forum: No registered users and 1 guest