Page 1 of 1

Pre 56 top yoke.

Posted: Wed Jan 22, 2020 6:10 pm
by derekmalcolm
I have a cast alloy top yoke for my 55 vb but I find that rather than it being drilled to take the 1 inch plugs that go into the stantions the holes are 3/4 inch. Drags tell me that there is only one design of cast top yoke which takes the 1 inch plug so I hope somebody can help.me identify this part ?

Re: Pre 56 top yoke.

Posted: Wed Jan 22, 2020 7:42 pm
by paul.jameson
Drags are correct. The alloy yoke has 3/4" holes as standard. What you are missing are the stepped tubes which screw into the top of the stanchions. A glance at the parts book will show you these.