handle bars

Bikes or not. Whatever
paul_turner
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 141
Joined: Mon Apr 04, 2011 7:08 pm
Location: worcestershire
Contact:

handle bars

Postby paul_turner » Fri Jun 07, 2019 9:50 pm

OK hoping this is simple as it should be but could any late model Square four owners check their handlebars and tell me which side the light switch is ?
there should be a hole where the knuckle sits to hold the switch, the cable goes from the switch inside the bars and comes out under the alloy clamp and into the headlight. All pretty straight forward but have just about to fit a pair recently purchased and the hole is on throttle side where as my others are on the the clutch side. So if you can check for me boys and girls I will know which pair is wrong.

daveleek
Posts: 45
Joined: Wed Dec 12, 2018 8:18 pm
Location: Netherlands
Contact:

Re: handle bars

Postby daveleek » Sat Jun 08, 2019 1:07 pm

Hi my 58 sq4 has the dip and horn switch on the left , Ime not saying its "correct" but it feels right and dont think I have had a bike with them on the right .

paul_turner
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 141
Joined: Mon Apr 04, 2011 7:08 pm
Location: worcestershire
Contact:

Re: handle bars

Postby paul_turner » Sat Jun 08, 2019 5:20 pm

Cheers for reply Dave my 58 also and agree feels right. It also hits the throttle if on the the left. these are for a 56 so I will see what else comes in
thanks again.

paul_turner
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 141
Joined: Mon Apr 04, 2011 7:08 pm
Location: worcestershire
Contact:

Re: handle bars

Postby paul_turner » Sat Jun 08, 2019 5:23 pm

Should have said hits the throttle if on the right.


Return to “Main Chat Forum”

Who is online

Users browsing this forum: KevinOToole, nevhunter and 8 guests