Basic Questions

tstewart
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 165
Joined: Sat Dec 12, 2015 3:06 pm
Location: Aberdeenshire
Contact:

Basic Questions

Postby tstewart » Sat Feb 16, 2019 5:55 pm

I bought this arrow as a basket case so never dismantled the bike. Can you guys help with these basic questions.

The exhaust hangers have a slight curve, I have attached a photo, do I have these fitted the wrong way round?

The primary chain adjuster was a problem, still not sure I have that right any comments?

Been struggling a bit with the rear brake lever onto the brake pedal shaft, is there a trick to this getting things lined up.

I bought new exhaust pipes and silencers from Draganfly, the right hand side went on great but the left hand side I had to file the hole on the pipe bracket, seems as if maybe the bend is not as good as the other side. Anyone else had ths?

Any help gratefully accepted.
Attachments
IMG_0915.JPG
IMG_0914.JPG
IMG_0913.JPG
IMG_0912.JPG
IMG_0911.JPG

User avatar
grahamhibbs
Holder of a Nylon Anorak