Are you really sure you want to do that? It seems like an easy fix but might (or might not) cause you serious problems in the future when additives to gasoline change. If pinhole leaks have developed then likely the metal is too thin so more serious measures are called for. If it develops further leaks after the coating has been applied then your options for dealing with those leaks is limited because will make, say, soldering very difficult indeed.volker.halbach wrote:I am going to seal my panel tank with the Slosh tank sealer.
alan.moore wrote: Well our tanks don't have one so it has to come out of the petrol tap 'boss'.
volker.halbach wrote:To get the last surplus drops out I'll try to use a syringe with a tube.
Mick D wrote:
Sorry if I've missed something, but why not drain the surplus via the filler orifice? you can even get a finger in to remove the last drops of excess.
Users browsing this forum: No registered users and 2 guests