Dynamo / Electronic regulator woes

General electrical problems
jj.palmer
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 254
Joined: Tue Oct 15, 2013 3:07 pm
Location: Denby Village, Derbyshire.
Contact:

Re: Dynamo / Electronic regulator woes

Postby jj.palmer » Wed Sep 12, 2018 7:24 pm

I bought the brushes off ebay, cannot now remember who from, the only thing that I do remember is that the reciept stated the name of a person having a BA (honours) degree or similar. Someone on the forum may recognise a connection.

Regards,
John P.

User avatar
Keith.owen
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 1112
Joined: Tue May 03, 2011 2:01 pm
Location: Bramley, Hamsphire
Contact:

Re: Dynamo / Electronic regulator woes -Updare

Postby Keith.owen » Mon May 20, 2019 10:04 am

Hi,
Well I thought that i'd fixed the problem, but hadn't - it returned.

I do now believe however, that it is finally sorted.

I had used the original regulator box, having removed the electromechanical device, soldering the wires of the new regulator to the terminals. herein was the problem. The terminals are made from two parts, a pushed in bush into which the wires of the harness are pushed and the terminal which is placed over the other end which was then riveted. The result was an intermittent contact. When I soldered the wires into the bush, I resolved the problem. :idea:

This tool me ages to solve, but I thought I'd let you all know so that no one else suffers from this malaise!

Keith
Keith Owen
AOMCC Member 4296
1950 Rigid Ariel VH
1951 Rigid Ariel NH (under construction)
1973 Norton 850 Commando Interstate


Return to “Electrics”

Who is online

Users browsing this forum: No registered users and 33 guests