'How To make' WNG Field Stand Clips

specifications, colours, contract nos, variations etc
FOR GENERAL ENGINE AND GEARBOX, USE THE FOUR STROKE TECHNICAL FORUM
User avatar
alan.moore
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 1188
Joined: Sat Jul 19, 2014 1:29 pm
Location: Leicestershire UK
Contact:

Re: 'How To make' WNG Field Stand Clips

Postby alan.moore » Thu May 30, 2019 3:08 pm

The early 1940 design had staggered holes....here is an image from Conucopia... that is why there are two part numbers for the 1940 part because, as Nev says, the top and bottom clips are different because of the staggered holes. The later 1941 design are identical top and bottom as the holes are ovalised. The good thing about making them yourself is that you can custom fit them to your bracket and stand.

stand clip cornucopia.jpg


Cheers
Alan
1939 VH Redhunter;1942 RN WNG;1951 Triumph 6T Thunderbird;1970 BSA B175 Bantam;1986 Yamaha SRX600 single
http://cloggymoore.wix.com/triumph-pre-unit-6t


Return to “W/NG Technical”

Who is online

Users browsing this forum: No registered users and 0 guests